JSR6-40.5 SF6 gas-insulated metal-enclosed switchgear

Product Overview

JSR6-40.5 SF6 gas-insulated metal-enclosed switchgear (referred to as inflatable ring main unit) is designed and developed by our company by digesting and absorbing foreign advanced technology and combining it with domestic power supply system requirements. A new generation of miniaturized gas-insulated medium-voltage switchgear. The extensive use of advanced laser technology, sensing technology, and detection technology in the product manufacturing process ensures high product safety and reliability.

JSR6-40.5/(R/T)630-20(31.5) type inflatable ring main unit is a 50Hz AC three-phase indoor high-voltage power distribution equipment. It is a switchgear that seals the load switch, grounding switch and return busbar in a metal shell, adopts a spring operating mechanism, and uses SF6 gas as arc extinguishing and insulating medium. It is suitable for ring network power supply or dual radiation power supply of 40.5kV power supply line. It can change the original single radiation power supply mode. When the line fails, it can restore the transformer loop feed in time, greatly improving the reliability and utilization of power supply. At the same time, the ring main unit is safe to use, not affected by climate, easy to install, requires little maintenance, saves space, and is suitable for installation in box-type substations.

Technical parameters

Item		Load switch unit	Combined electrical unit	Circuit breaker unit
Rated voltage		40.5kV
Rated power frequency (1min) withstand voltage	Phase to phase and ground	95kV
	Fracture	118kV
Lightning impulse (peak) withstand voltage	Phase to phase and ground	185kV
	Fracture	215kV
Rated current		630A	50A	630/1250A
Transfer current			1000A
Rated short-time withstand Current		20kA 4S	---	25/31.5kA 4S
Rated short circuit breaking current			31.5kA	25/31.5kA
Rated short circuit closing current (peak value)		50kA	80kA	63/80kA
Mechanical life (main switch/grounding switch)		5000/2000		10000/3000
Air box fire protection grade		IP67
Shell protection grade		IP3X
SF6 gas rated pressure (20℃)		0.04MPa
Annual leakage rate		≤ 0.01%
Full cabinet partial discharge value		≤20pC

Features

Strong environmental adaptability - fully insulated, fully sealed, not affected by the environment; insulation performance is not affected by altitude; can be installed in humid, sandy and dusty, salt spray, mining and other areas without taking special precautions.

Safe and reliable - high-voltage live objects such as switches and busbars are sealed in a stainless steel box. The cable connectors are fully insulated and touchable. There is no risk of electric shock for operating and maintenance personnel. It has complete mechanical and electrical interlocking, which can effectively prevent accidents caused by misoperation. It may cause personal injury and equipment damage; the gas box is made of high-quality stainless steel plate and laser welding process to prevent gas leakage and has a service life of more than 30 years.

Modular design - using modular design, the modules are connected by expansion bus, which can realize full modular configuration and meet various complex power distribution schemes.

Three-dimensional simulation design—Use SolidWorks software for three-dimensional simulation design, and use finite element analysis software for mechanical strength and insulation analysis to optimize the design of the product.

Product usage environment

Indoor ambient temperature:

Maximum temperature +50℃

Indoor ambient temperature +40 ℃

Minimum temperature -40℃

Indoor ambient humidity:

Daily average relative humidity below 95%

The monthly average relative humidity is below 90%

The altitude of the installation site is 2000m and below

The earthquake intensity does not exceed 8 degrees

There is no risk of fire or explosion , places with chemical corrosion and severe vibration

Note: If the above environmental conditions are exceeded, please contact us